Fine pitch test probes are usually used to contact very small test point in small grids. Sometimes mounted without receptacles.

Test probes used with receptacles are changed from top side in the usual way, without breaking the electrical connection. In order to avoid elaborate wiring of the receptacle, use of pre-wired receptacles is preferred.

Test probes with a plug connection can be used without a receptacle to enable them to also be used for small grids. The plug is usually pressed or glued into the plug mounting plate.

Fine pitch test probes are used for test points positioned close together, which cannot be contacted by standard test probes. The use of these test probes can either be with or without a receptacle.

Fine pitch test probes with receptacles

Can be changed from top side in the usual way, without breaking the electrical connection. In order to avoid elaborate wiring of the receptacle, use of pre-wired receptacles is preferred.

Fine pitch test probes without receptacles

Test probes with a plug connection can be used without a receptacle to enable them to also be used for smaller grids. The plug is usually pressed or glued into the plug mounting plate.

The probes have a floating mount in the probe plate and are centered and secured by means of a holding guide plate. This type of customising has the following advantages:

  • Contacting of very small pads (can be used in grids smaller probes with receptacles)
  • High contacting accuracy due to low 'wobble’ of test probe for holding guide plate
  • Sandwich assembly of test fixture possible
  • Larger drilling tolerances permitted in the probe plate

Fine Pitch

   

Search  

   
   
© ALLROUNDER



Products

Pulse Test Solutions

Pulse Product Handling Solutions

Pulse Test Instruments

Pulse Designtech

Services

About Us

Contact Us

Site-Links