ECT’s CPG TO SHOWCASE THE ZIP® FAMILY AT BiTS™
Burn-In & Test Socket
Workshop

Pomona, Calif., February 2011 – Everett Charles Technologies’ (ECT) Contact Products Group (CPG) will showcase the latest additions to its ZIP® family of flat technology Pogo® pins in Booth A04 at the upcoming BiTS™ Burn-In & Test Socket Workshop, scheduled to take place March 6-9, 2011 at the Hilton Phoenix East/Mesa Hotel in Mesa, Arizona. A new eight-page ZIP® Product Portfolio brochure will be available for the first time at the ECT CPG booth. ZIP® has recently been granted US Patent Number 7,862,391. In addition to the ZIP® family, ECT’s Contact Products Group’s display will highlight its expanded line of available pitches from 0.8mm down to 0.2mm center spacing. ECT also will feature the high-performance Bantam®, the pin of choice for the most demanding test applications; the Mini-Mite™, for higher current and consistent C-res requirements; and the CSP series, for a wide variety of double-ended Pogo technology applications with drop-in compatibility for many competitor test probes. ECT CPG personnel will be on hand to demonstrate the company’s latest technologies and answer customer inquiries related to its new range of products including: ZIP® SCRUB™ ― The ZIP® SCRUB pin features a positive scrub-action pad and ball contact on lead-free plated array and peripheral devices where solder transfer causes frequent cleaning and maintenance cycles.

ZIP® KELVIN ― ECT’s ZIP® KELVIN is ideal for voltage sensitive device tests on array or peripheral devices requiring sub-1 ohm resistance measurements typical in RDSON and highpower applications.

ZIP® SUPER SHORT ― The SUPER SHORT is designed for 0.5nH low impedance, high frequency testing.

ZIP® Long-Travel ― The ZIP® Long-Travel, with an OAL up to 6.7mm, was developed for contacting large devices and strip tests where planarity and compliance are an issue.

Z8 ― The Z8 is suited for burn-in applications and combines the performance features of the standard ZIP® in a burn-in-price-point replaceable compliant pin.

The ZIP® patented 2-D design features planar contact surfaces fabricated by a unique manufacturing process, delivering performance and cost advantages. The ZIP® Series is designed to meet today’s demanding test requirements and economics.

For more information about Everett Charles Technologies’ ZIP® family or to request advanced copies of the new product portfolio, This email address is being protected from spambots. You need JavaScript enabled to view it..

Everett Charles Technologies’ CPG
to Introduce the New Edge™ in
Loaded Board Test at the IPC APEX EXPO

Pomona, Calif., February 8, 2011 – The Contact Products Group (CPG) of Everett Charles Technologies will display the Edge™ for the first time in Booth #447 at the upcoming IPC APEX EXPO, schedule to take place April 12-14, 2011at the Mandalay Bay Resort & Convention Center in Las Vegas. CPG President, Bud Fabian, said “We have been able to develop a low-cost, interchangeable alternative to the expensive round, steel-bladed plungers that are being increasingly requested by customers worldwide in test fixtures.” The Edge™ provides an economical, sharp, aggressive and shallow angle blade tip for reliable via probing on PCBs by incorporating ECT’s patented ZIP® flat technology manufacturing cost advantages. It is fully replaceable in current fixtures with 100 mill receptacles installed. In addition to the Edge™, CPG will exhibit its entire range of Contact Products, Ostby-Barton and Pylon Pogo® pins addressing the in-circuit, functional, semiconductor, high frequency coaxial, high current and battery interconnect markets. Products to be highlighted at the show include the Edge™, an expanded range of LFRE™ tip styles, and the new long-travel Z3 addition to the ZIP® family of “flat” technology Pogo® pins.

# # #

Everett Charles Technologies is a subsidiary of Dover Corporation (NYSE: DOV) a leading manufacturer of electrical test products and services, including PogoÒ test contacts, semiconductor test products, bare-board automatic test systems, and bare and loaded PCB test fixtures. ECT manufacturing, service, and support facilities are ISO registered with locations throughout the United States, Europe, and Asia. The company has been awarded numerous patents and participates actively in developing industry standards. Corporate offices for Everett Charles Technologies are located at 700 E. Harrison Ave., Pomona, California, USA, 91767. Additional information about ECT is available via the Internet at www.ectinfo.com.

Christmas 2010

Christmas 2010

We Have Been Featured on ASEPCO Quick-Read Newsletter

We've been featured on ASEPCO Quick-Read Newsletter on "Outsourcing CAD: Is It Right for Your Business?" which was written by Jeff Wilber of Pulse DesignTech. ASEPCO is a company for designing and manufacturing the highest quality products in the aseptic processing equipment industry. Read more.

Christmas Party 2009

Christmas Party 2009

Team Building at Grande Island

Team building Grande Island
   

Search  

   
   
   
© ALLROUNDER



Products

Pulse Test Solutions

Pulse Product Handling Solutions

Pulse Test Instruments

Services

About Us

Contact Us

Site-Links